SKILL ALIGN · YEAR 12 · 2027
VCE Mathematical Methods 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
13 additional independent questions introduce all 10 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.2 · 13 questions · 47 practice marks · Booklet build: 20261112-01
Independent free sample. These 13 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: VCAA Mathematics Study Design v1.1 (November 2022), Mathematical Methods Units 3–4, from 2023 (checked 26 October 2026). This resource is not endorsed by VCAA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed VCAA Mathematical Methods Units 3–4 learning. Technology-free tasks use by-hand reasoning with no calculator or notes; technology-active tasks allow approved numerical, graphical, symbolic and statistical functionality, a scientific calculator and one bound reference. Use the linked VCAA formula sheet separately in either mode. Give exact results unless rounding is requested, use radians unless degrees are explicit, retain domains and show reasoning beyond a CAS output. Practice marks and different checks do not predict a study score or measure equated improvement. For 2027 technology-active examination preparation, use VCAA-approved restricted CAS settings: no user-defined functions or other retrievable information, communication or language translation. Follow current VCAA device instructions; technology-free tasks still permit no calculator or notes.
VCAA formula sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
FUN · Functions, transformations and graphical evidence
Selected Units 3–4 function/domain/representation skills; study design pp. 98–102. This additional sample is not whole-course coverage.
Before you start: Function notation, intervals, exact substitution and powers.
Suggested study time: 35 minutes, including review.
sample-power-domain-and-image 3 marks · Technology-free · Define, apply and justify
For f:[−8,1]→R, f(x)=x^(2/3), use the real cube-root convention. State the range and solve f(x)=1. Explain why the equation has two answers even though f is a function.
Worked solution — sample-power-domain-and-image
- Interpret x^(2/3)=(cube root x)². Range [0,4]; f=1 at x=−1 and 1.
- A function assigns one output to each input; it may assign the same output to different inputs.
Marking guidance — one mark per criterion — sample-power-domain-and-image
- States range [0,4].
- Gives both allowed solutions.
- Distinguishes a function from a one-to-one function.
Acceptable alternatives — sample-power-domain-and-image
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: sample-power-domain-and-image — Rejecting negative inputs to a real cube root.
Next step: sample-power-domain-and-image — Apply the denominator root before the numerator power.
sample-cancelled-domain-retention 3 marks · Technology-free · Define, apply and justify
The rule r(x)=(x²−9)/(x−3) is supplied only as an algebraic expression. Simplify it and determine its maximal domain and range. Explain why the line y=x+3 on all R is a different function.
Worked solution — sample-cancelled-domain-retention
- r(x)=x+3 for x≠3. Domain R except 3; range R except 6.
- Cancelling a factor does not assign a value at the original denominator zero, while the complete line includes (3,6).
Marking guidance — one mark per criterion — sample-cancelled-domain-retention
- Simplifies with x≠3 retained.
- Gives the missing output 6.
- Explains the difference at the removed point.
Acceptable alternatives — sample-cancelled-domain-retention
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: sample-cancelled-domain-retention — Restoring a cancelled input silently.
Next step: sample-cancelled-domain-retention — Record restrictions before algebraic simplification.
sample-window-loss 3 marks · Technology-active · Define, apply and justify
A CAS window uses −2≤x≤2 and −1≤y≤5 for f(x)=(x−4)²−3. The display is blank. Determine whether f has real zeros and give the zeros to three decimal places; explain the blank view using the window.
Worked solution — sample-window-loss
- Zeros 4±√3≈2.268 and 5.732, both outside the x-window.
- On [−2,2], the minimum is f(2)=1, so the graph is not wholly above the y-window: it enters near x=2. A completely blank display is inconsistent with the stated correct plotting setup; check the entered expression or settings as well as zooming.
Marking guidance — one mark per criterion — sample-window-loss
- Obtains both real zeros to three decimals.
- Locates both beyond x=2.
- Uses f(2)=1 to diagnose the claimed blank display rather than accepting it.
Acceptable alternatives — sample-window-loss
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: sample-window-loss — Assuming a reported display proves absence of roots.
Next step: sample-window-loss — Check an endpoint numerically and compare both axes with actual function values.
ALG · Composition, inverses and parameter equations
Units 3–4; pp. 99, 101–102: composition existence, inverse restrictions, literal and polynomial equations, simultaneous systems and numerical algorithms. Representative topic preview; full resources develop further applications and depth.
Before you start: FUN, algebraic equivalence and domain restrictions.
Suggested study time: 20 minutes, including review.
ALG-S1 4 marks · Technology-free · Define, apply and justify
Nonnegative real allocations a,b,c,d satisfy a+2b=12 and c+2d=18. A technician needs T=3a+6b+2c+4d and M=a+b+c+d, and claims that two readings cannot determine either requested quantity. Find T, determine the entire possible interval for M, and give allocations attaining both endpoints. Explain why knowing a derived quantity need not identify every allocation.
Worked solution — ALG-S1
- T=3(a+2b)+2(c+2d)=3(12)+2(18)=72, fixed by the readings.
- Writing a=12−2b and c=18−2d gives 0≤b≤6, 0≤d≤9 and M=30−b−d. Thus M ranges over every value in [15,30].
- Allocations (a,b,c,d)=(0,6,0,9) and (12,0,18,0) attain 15 and 30. The sum b+d varies continuously through [0,15], so there are no missing intermediate M values. These distinct allocations have the same T: a measured combination can be identified without identifying all components.
Marking guidance — one mark per criterion — ALG-S1
- Expresses T through the two readings and obtains 72
- Derives the nonnegative parameter bounds
- Finds the complete interval M in [15,30]
- Gives both attaining allocations and explains partial identification
Acceptable alternatives — ALG-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: ALG-S1 — Confusing uniqueness of all unknowns with uniqueness of a requested expression.
Next step: ALG-S1 — Express the target in terms of measured combinations before attempting to recover every variable.
EXP · Exponential and logarithmic models
Units 3–4; pp. 98–102: exponential/logarithmic graphs, laws, transformations, equations and modelling with valid domains. Representative topic preview; full resources develop further applications and depth.
Before you start: Positive logarithm arguments, index laws and exact forms.
Suggested study time: 20 minutes, including review.
EXP-S1 3 marks · Technology-free · Define, apply and justify
Three positive calibration quantities A,B,C are reported to satisfy ln(A/B)=ln2, ln(B/C)=ln3 and ln(C/A)=−ln5. Test whether all three reports can hold simultaneously. If the first two are trusted, replace only the final report by a consistent exact value and describe all positive triples satisfying the repaired system.
Worked solution — EXP-S1
- Adding the left sides gives ln[(A/B)(B/C)(C/A)]=ln1=0. The reported right sides sum to ln(6/5), which is nonzero, so the original system is inconsistent.
- The trusted reports imply A=2B=6C. Thus ln(C/A)=−ln6.
- All repaired positive triples are (A,B,C)=(6t,3t,t), t>0; ratios determine relative calibration but not the common scale.
Marking guidance — one mark per criterion — EXP-S1
- Uses the closed product to detect inconsistency
- Repairs the final log to −ln6
- Gives the full positive family and distinguishes ratio from absolute scale
Acceptable alternatives — EXP-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: EXP-S1 — Solving each pair independently without closing the cycle.
Next step: EXP-S1 — Multiply every ratio around a closed calibration loop; the product must be one.
TRIG · Circular functions and restricted solutions
Units 3–4; pp. 98–102: sine/cosine/tangent, transformations, exact and numerical solutions, periods and contextual domains. Representative topic preview; full resources develop further applications and depth.
Before you start: Radians, unit-circle values and the distinction between period and a displayed interval.
Suggested study time: 20 minutes, including review.
TRIG-S1 4 marks · Technology-free · Define, apply and justify
A sensor records R(t)=sin(t) when sin(t)<1/2 and R(t)=1/2 otherwise, over 0≤t≤2π. An operator solves R(t)=1/2 by reporting only t=π/6 and 5π/6. Give the complete solution set, its total duration as a fraction of the observation interval, and explain what information saturation has removed. Also solve R(t)=−1/2 on the same interval.
Worked solution — TRIG-S1
- Saturation gives R=1/2 for every t in [π/6,5π/6], not just its endpoints. Its duration is 2π/3, or one third of the 2π observation interval.
- Different true heights sin(t)≥1/2 produce the same recorded value; the saturated reading cannot recover their heights or select a unique time.
- Negative readings are not clipped, so R=−1/2 at t=7π/6 and 11π/6 only.
Marking guidance — one mark per criterion — TRIG-S1
- Gives the entire closed interval for the saturated reading
- Finds duration fraction 1/3
- Explains lost height/time information
- Gives both negative-level solutions
Acceptable alternatives — TRIG-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: TRIG-S1 — Replacing a clipped level equation with an unclipped equality.
Next step: TRIG-S1 — Translate the recorded plateau into an inequality for the underlying sine signal.
DER · Differentiation, continuity and derivative graphs
Units 3–4; pp. 99–102: continuity/differentiability, chain/product/quotient rules, gradient graphs, tangents and rates. Representative topic preview; full resources develop further applications and depth.
Before you start: Limits informally, elementary derivatives and function domains.
Suggested study time: 20 minutes, including review.
DER-S1 4 marks · Technology-free · Define, apply and justify
At x=1, f(1)=2 and g(1)=1 exactly, while calibration permits f′(1)=a in [3.9,4.1] and g′(1)=b in [1.9,2.1] independently. Set h=f/g. Find the complete possible interval for h′(1). A report says h must be increasing near 1. Test it by constructing one admissible pair of linear functions with positive h′(1) and another with negative h′(1); ensure each quotient is defined near 1.
Worked solution — DER-S1
- The quotient rule gives h′(1)=(a·1−2b)/1²=a−2b. Its attainable range is [3.9−2(2.1),4.1−2(1.9)]=[−0.3,0.3].
- Use f=2+4.1(x−1), g=1+1.9(x−1) for derivative 0.3; use f=2+3.9(x−1), g=1+2.1(x−1) for derivative −0.3.
- Both denominators equal 1 at x=1 and stay nonzero in a sufficiently small neighbourhood. Their derivatives retain opposite signs nearby, so the universal increasing claim fails.
Marking guidance — one mark per criterion — DER-S1
- Derives h′(1)=a−2b
- Finds sharp bounds [−0.3,0.3]
- Constructs both compatible linear pairs
- Justifies their local domains and rejects the universal monotonicity claim
Acceptable alternatives — DER-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: DER-S1 — Using midpoint calibration values as if they proved a sign for every permitted model.
Next step: DER-S1 — Propagate bounds through the quotient rule, then show that claimed endpoint behaviours are attainable.
APP · Stationary behaviour and constrained optimisation
Units 3–4; pp. 99–102: monotonicity, stationary/inflection points, global versus local extrema and endpoint-aware optimisation. Representative topic preview; full resources develop further applications and depth.
Before you start: DER, sign diagrams, practical constraints and units.
Suggested study time: 20 minutes, including review.
APP-S1 4 marks · Technology-free · Define, apply and justify
The nominal benefit f(x)=1−(x−1)² is used on [0,2]. A continuous true benefit g satisfies |g(x)−f(x)|≤0.02 everywhere. First find f's global maximiser. If x* is any global maximiser of g, prove that |x*−1|≤0.2. Does this guarantee x*=1? Test that stronger claim using g(x)=f(x)+0.02(x−1).
Worked solution — APP-S1
- Since f′=−2(x−1), f increases to x=1 and decreases after it; f(1)=1 exceeds f(0)=f(2)=0.
- Continuity on the closed interval ensures a maximiser x*. Now g(x*)≥g(1)≥0.98 and g(x*)≤f(x*)+0.02, so f(x*)≥0.96. Therefore (x*−1)²≤0.04 and |x*−1|≤0.2.
- The proposed g meets the error bound on [0,2], but g′=−2(x−1)+0.02 vanishes at x=1.01, its unique maximum. Location is bounded without being fixed exactly.
Marking guidance — one mark per criterion — APP-S1
- Finds and verifies the nominal global maximum at 1
- Uses g(x*)≥g(1) and both error allowances
- Derives the location bound 0.2
- Verifies the admissible countermodel and its maximiser 1.01
Acceptable alternatives — APP-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: APP-S1 — Treating a small output error as proof of the identical optimal input.
Next step: APP-S1 — Compare the true optimum with the nominal optimum before converting a value gap to an input bound.
INT · Integration, accumulation and approximation
Units 3–4; pp. 99–102: antiderivatives, boundary conditions, definite integrals, trapeziums, areas, average values and accumulated change. Representative topic preview; full resources develop further applications and depth.
Before you start: DER, exact arithmetic, signs and interval lengths.
Suggested study time: 20 minutes, including review.
INT-S1 4 marks · Technology-free · Define, apply and justify
A meter reports ∫ₐ^(a+1) r(t)dt=2 for every real start time a. An analyst concludes the continuous nonnegative rate must be r(t)=2 at all times. Test this using r(t)=2+sin(2πt): verify nonnegativity and every reported total exactly, then give two different instantaneous readings. Explain why even all of these sliding totals do not identify a constant rate.
Worked solution — INT-S1
- The candidate ranges from 1 to 3 and is continuous, so it is a permitted nonnegative rate.
- An antiderivative is 2t−cos(2πt)/(2π). Across [a,a+1], cosine has the same endpoint value, so every reported total is exactly 2.
- Yet r(1/4)=3 and r(3/4)=1. Unit-window integration removes this zero-mean periodic component; complete agreement of the supplied totals therefore does not force the pointwise rate to be constant.
Marking guidance — one mark per criterion — INT-S1
- Verifies continuity and range [1,3]
- Derives the identical total for an arbitrary a
- Gives two unequal instantaneous readings
- Explains the lost periodic information and rejects uniqueness
Acceptable alternatives — INT-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: INT-S1 — Differentiating a moving-window total as though only one terminal moved.
Next step: INT-S1 — Compare both endpoint contributions or evaluate a primitive across a full period.
DISC · Discrete random variables and Bernoulli models
Units 3–4; pp. 100–102: PMFs, moments, Bernoulli/binomial conditions, interval and conditional probabilities. Representative topic preview; full resources develop further applications and depth.
Before you start: Sample spaces, probability laws and distinct count outcomes.
Suggested study time: 20 minutes, including review.
DISC-S1 4 marks · Technology-free · Define, apply and justify
An observed machine record consists of 100 complete cycles: exactly 50 take 1 minute and 50 take 3 minutes. One cycle is chosen uniformly from the 100. Separately, one whole minute-slot is chosen uniformly from the 200 recorded minute-slots, and D is the duration of the cycle containing it. Find both duration distributions and their means. Explain why the same cycle-duration law cannot be used for both choices; no random long-run assumption is needed.
Worked solution — DISC-S1
- Uniform cycle selection gives probabilities 1/2 at 1 and 3, and mean duration 2 minutes.
- The short cycles occupy 50 slots and the long cycles 150 slots. Thus P(D=1)=1/4, P(D=3)=3/4, and E(D)=1/4+9/4=2.5 minutes.
- A long cycle has three opportunities to contain the sampled slot. The finite sampling units differ; equal counts of cycles do not imply equal counts of minute-slots.
Marking guidance — one mark per criterion — DISC-S1
- Finds the cycle-selected law and mean 2
- Counts the 50 and 150 minute-slots
- Finds the slot-selected law and mean 2.5
- Explains length weighting through the different sampling unit
Acceptable alternatives — DISC-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: DISC-S1 — Counting cycles when the random choice is a minute-slot.
Next step: DISC-S1 — List the actual equally likely elementary outcomes of each selection rule.
CONT · Continuous densities and normal distributions
Units 3–4; pp. 100–102: valid PDFs, support, moments, conditional probability, quantiles and normal models. Representative topic preview; full resources develop further applications and depth.
Before you start: INT, non-negative density, total probability one and standardisation.
Suggested study time: 20 minutes, including review.
CONT-S1 4 marks · Technology-free · Define, apply and justify
X is continuous uniform on [−1,1]. A recorder stores Y=0 when X≤0 and Y=X when X>0. Find P(Y=0), P(0<Y≤1/2) and P(Y≤1/2). Can any ordinary probability density on [0,1] describe the whole recorded law? Explain using what happens to the negative half of the original inputs.
Worked solution — CONT-S1
- P(Y=0)=P(X≤0)=1/2. The event 0<Y≤1/2 is 0<X≤1/2, giving probability 1/4. Therefore P(Y≤1/2)=3/4.
- The unchanged positive part has density 1/2 on (0,1], with total probability 1/2. The other half has collapsed to the single recorded value zero.
- No ordinary density can assign nonzero probability to a single point, so that positive-part density alone is not the full law. A continuous input can produce a recorded variable with a point mass after clipping.
Marking guidance — one mark per criterion — CONT-S1
- Finds the point mass 1/2
- Finds probabilities 1/4 and 3/4 with the zero event counted once
- Explains the collapse of a whole input interval
- Rejects an ordinary full-law density by its zero point probabilities
Acceptable alternatives — CONT-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: CONT-S1 — Assuming that every function of a continuous input stays continuously distributed.
Next step: CONT-S1 — Find the preimage of the recorded value zero before integrating a proposed density.
INF · Sample proportions, simulation and inference
Units 3–4; pp. 100–104: sampling distributions, simulation, large-sample normal approximation and confidence intervals for proportions; three outcomes integrated. Representative topic preview; full resources develop further applications and depth.
Before you start: DISC/CONT, population parameters versus random sample statistics and sampling assumptions.
Suggested study time: 20 minutes, including review.
INF-S1 4 marks · Technology-active · Define, apply and justify
Only four original binary population observations are available: 0,0,0,1. A simulator repeatedly chooses independently with replacement from these four saved values, makes a simulated list of length 400, and records its proportion of ones. Conditional on this saved data, derive the count distribution and the mean and standard deviation of the simulated proportion. A report claims that the narrow simulated spread supplies the information of 400 fresh population observations about the unknown population proportion p. Explain the error and what the simulation actually targets.
Worked solution — INF-S1
- Each resampled value is 1 with conditional probability 1/4. Thus the simulated count is Bin(400,1/4), and the simulated proportion has mean 1/4 and standard deviation √[(1/4)(3/4)/400]=√3/80≈0.02165.
- These are properties conditional on the fixed four-value empirical record. Increasing the simulated list length tightens concentration around its recorded fraction 1/4.
- It does not add new population evidence or remove uncertainty from the original sample of four. The simulation describes repeated draws from that empirical law, not 400 fresh observations at the unknown p, so the claimed population information or confidence justification does not follow.
Marking guidance — one mark per criterion — INF-S1
- Derives the conditional Bin(400,1/4) law
- Finds mean 1/4 and SD √3/80≈0.02165
- Identifies the empirical law as the fixed simulation target
- Explains why simulated list length does not replace the original population sample size
Acceptable alternatives — INF-S1
- Credit equivalent exact forms, the requested correctly rounded results and other valid methods that preserve the stated domain and technology mode. For reasoning tasks, credit the required evidence rather than an unsupported answer. Carry a plausible earlier numerical error through a valid later method once without restoring an earlier lost criterion or double-crediting the same reasoning.
Common error: INF-S1 — Treating resampled saved values as newly collected independent population evidence.
Next step: INF-S1 — Separate the conditional resampling experiment from the original population sampling experiment.