SKILL ALIGN · YEAR 12 · 2027
HSC Mathematics Standard 2 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
12 additional independent questions introduce all 10 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.1 · 12 questions · 51 practice marks · Booklet build: 20261106-04
Independent free sample. These 12 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: NESA Mathematics Standard 11–12 Syllabus (2024), Year 12 Standard 2; first HSC 2027 (checked 25 October 2026). This resource is not endorsed by NESA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed Year 12 workshops, not full HSC simulations. Use a NESA-approved scientific calculator, the 2024 Standard reference sheet and a ruler. Use degree mode, showing reasoning before rounding. Hand loan schedules have at most four periods; longer spreadsheet extracts are supplied. Annuities use end-period payments and supplied interest-factor tables. Normal probabilities use z-scores and the approximate 68/95/99.7 empirical rule. Critical-path projects have at most ten activities and sufficient resources unless stated otherwise. Spreadsheet learning tasks require a spreadsheet or equivalent hand table where specified. Different checks do not establish measured improvement, an ATAR or an examination grade.
NESA reference sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
ALG · Algebraic relationships
MST-12-S2-01: simultaneous linear, exponential, quadratic and reciprocal relationships, representations and model limits. Representative independent preview, not a complete chapter course.
Before you start: Year 11 formulas, rearrangement, linear graphs, substitution and percentages.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
ALG-sample 4 marks · Scientific calculator · Select, calculate and explain
Two types of component have fixed positive masses x and y grams. Three exact records say x+y=10, 2x+y=14 and x+2y=17. Exactly one record is wrong, but no record has been independently verified. Solve the first two and test the third. A technician therefore declares the third record wrong. Challenge that identification by solving the first and third instead, checking the second and explaining what further evidence is needed.
Worked solution — ALG-sample
- The first two give x=4,y=6, which predicts x+2y=16, not 17.
- The first and third instead give y=7,x=3; then 2x+y=13, not 14. Both pairs give positive masses and exactly one inconsistent record.
- Thus the first choice of two records does not identify the bad third row. An independent weighing or verification of two particular records is needed to select the actual masses and erroneous record.
Marking guidance — one mark per criterion — ALG-sample
- Solve the first pair as x=4,y=6
- Identify its third-row prediction 16
- Construct x=3,y=7 and check the conflicting second-row prediction 13
- Explain why pair selection alone cannot identify the erroneous record
Acceptable alternatives — ALG-sample
- Solving the second and third gives x=11/3,y=20/3 and a conflicting first-row total 31/3; that is another valid counterexample. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: ALG-sample — Treating the two equations chosen for solving as verified measurements.
Next step: ALG-sample — Label the assumed trustworthy rows before solving, then test an alternative pair.
INV · Investment and loans
MST-12-S2-02: simple/compound investments, shares, depreciation, reducing loans and credit-card evidence. Representative independent preview, not a complete chapter course.
Before you start: Match rates to periods; distinguish capital, income, interest, fees and dated repayments.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
INV-sample 4 marks · Scientific calculator · Select, calculate and explain
Two fictional accounts pay one year's simple interest with no fees or other flows. A pays 2% on the first $3000 and 5% only on any balance above $3000. B pays 4% on the entire balance. Compare their interest on $6000. For a starting balance P≥$3000, form each interest rule and find where they tie. Use those rules to say which pays more above that balance. Explain why A's advertised top rate of 5% does not rank it first at every balance.
Worked solution — INV-sample
- At $6000, A pays 3000×0.02+3000×0.05=$210; B pays 6000×0.04=$240.
- For P≥3000, I_A=60+0.05(P−3000)=0.05P−90 and I_B=0.04P.
- Equality gives 0.01P=90, hence P=$9000 and interest $360 in either account. Above $9000 A pays more, since I_A−I_B=0.01P−90 is positive.
- A's 5% applies only to the excess; its first $3000 earns less than B's rate. The comparison concerns these supplied one-year rules.
Marking guidance — one mark per criterion — INV-sample
- Find A $210 and B $240 at $6000
- Form both interest rules with the stated P≥3000 domain
- Find the $9000 crossover and common $360 interest
- Justify A's advantage above it and why the top rate alone is insufficient
Acceptable alternatives — INV-sample
- A correctly labelled difference rule or graphical intersection of the two interest lines is equivalent. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: INV-sample — Applying the top tier to all principal.
Next step: INV-sample — Separate the first $3000 from the excess before multiplying by a rate.
ANN · Annuities
MST-12-S2-03: end-period contributions/withdrawals, short tables, supplied interest factors and spreadsheets. Representative independent preview, not a complete chapter course.
Before you start: Compound multipliers, present/future value and cash-flow timelines.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
ANN-sample 4 marks · Scientific calculator · Select, calculate and explain
An existing $1000 fund earns 1% monthly for three months. The only permitted changes are equal nonnegative month-end deposits R; no withdrawal is allowed. Supplied factors are lump-sum multiplier 1.030301 and end-deposit future-value factor 3.0301. A planner wants exactly $900 at month 3 and solves 1000×1.030301+3.0301R=900. Interpret the resulting sign and decide whether that exact target is feasible. If the requirement instead means at least $900, find the least permitted R and the final surplus over $900. Keep full precision until reporting cents.
Worked solution — ANN-sample
- With R=0, the original fund already becomes $1030.301.
- Solving the exact-target equation gives R=(900−1030.301)/3.0301≈−$43.0022 per month. This is a withdrawal, outside the permitted nonnegative deposit rule, so exactly $900 is infeasible.
- For at least $900, R=0 is permitted and minimal; positive deposits only increase the final amount.
- The final amount is $1030.30 to cents, a $130.30 surplus. An infeasible exact equality does not make the lower-bound requirement infeasible.
Marking guidance — one mark per criterion — ANN-sample
- Find the zero-deposit future value $1030.301
- Interpret the negative inverse contribution and reject the exact target under the permitted rule
- Establish R=0 as the least feasible deposit for the lower-bound target
- Find the $130.30 surplus and distinguish equality from at least
Acceptable alternatives — ANN-sample
- A three-row recurrence B_next=1.01B+R verifies the supplied-factor model; no negative deposit is authorised by the arithmetic. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: ANN-sample — Reporting a negative regular deposit without checking the allowed cash-flow direction.
Next step: ANN-sample — Calculate the zero-contribution endpoint and read whether the target is an equality or a lower bound.
TRI · Trigonometry
MST-12-S2-04: right/non-right triangles, unique sine-rule conditions, given obtuse angles, cosine rule, area and bearings. Representative independent preview, not a complete chapter course.
Before you start: Degree mode, degrees/minutes, side-angle correspondence, elevation/depression and true/compass directions.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
TRI-sample 6 marks · Scientific calculator · Select, calculate and explain
Triangle ABC has AB=10 m, BC=7 m and included angle ABC=120°. Find AC using the cosine rule and the triangle's area. Let F be the perpendicular foot from C to the infinite line through A and B. Calculate CF and show that F lies beyond B, not within segment AB. A boundary consists only of segment AB. State the shortest distance from C to that boundary and explain why it is not CF. All lengths describe ideal level geometry.
Worked solution — TRI-sample
- AC²=10²+7²−2×10×7cos120°=219, so AC≈14.80 m.
- Area=½×10×7sin120°≈30.31 m². Thus CF=7sin120°≈6.06 m.
- The projection of BC towards A is 7cos120°=−3.5 m, placing F 3.5 m beyond B.
- Every point of AB lies on the A side of B; moving from B towards A increases its horizontal separation from C. The closest point of segment AB is therefore B, at distance BC=7 m.
- CF is the shorter distance to the infinite supporting line, but its endpoint F is outside the permitted boundary.
Marking guidance — one mark per criterion — TRI-sample
- Apply cosine rule to obtain √219 m
- Find area about 30.31 m²
- Calculate CF about 6.06 m
- Locate the foot 3.5 m beyond B from the negative projection
- Identify B and 7 m as the shortest permitted segment distance
- Explain why the perpendicular foot outside AB is not an admissible boundary point
Acceptable alternatives — TRI-sample
- Coordinates A=(0,0),B=(10,0),C=(13.5,7sin120°) give the same distances; no ambiguous SSA case is involved. Award the B/7 m result and the boundary explanation independently: with the first four criteria met, B/7 m without the explanation earns 5/6; the explanation without the stated B/7 m result also earns 5/6. Do not require extra prose when a labelled sketch establishes the permitted segment and excluded foot. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: TRI-sample — Using the distance to an infinite line as the distance to a finite boundary without checking the foot.
Next step: TRI-sample — Sketch the supplied obtuse angle first, then mark whether the perpendicular foot belongs to the segment.
RATE · Ratios and rates
MST-12-S2-05: capture–recapture, scaled plans, land/radial/trapezoidal/rainfall quantities, travel, fuel and energy. Representative independent preview, not a complete chapter course.
Before you start: Year 11 measurement, fractions, unit conversions, proportions and whole-item constraints.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
RATE-sample 4 marks · Scientific calculator · Select, calculate and explain
A rectangular tank has internal dimensions 12 m by 8 m by 3 m. A geometrically similar model uses length scale 1:200 in every direction. Find the model's internal dimensions in millimetres and capacity in millilitres. A model pump fills it from empty in 18 seconds at a constant rate. The actual tank's specified pump supplies 2.0 L/s constantly; neither tank loses water. Find that pump's filling time in hours. A report multiplies the model's 18 seconds by the length-scale factor 200 to predict one hour. Explain why the report's time scaling is invalid, using compatible volume and flow ratios.
Worked solution — RATE-sample
- Model dimensions are 60 mm by 40 mm by 15 mm. Their product is 36000 mm³=36 mL.
- Model pump flow=36/18=2 mL/s. Actual volume=12×8×3=288 m³=288000 L.
- Actual filling time=288000/2=144000 s=40 h.
- The volume ratio is 200³=8000000 after converting both volumes to the same units. Actual pump flow 2 L/s is 2000 mL/s, a ratio of 1000 to the model flow. Thus the time ratio is 8000000/1000=8000, giving 18×8000=144000 s. Length ratio 200 is not that time ratio.
Marking guidance — one mark per criterion — RATE-sample
- Find model dimensions 60/40/15 mm and capacity 36 mL
- Find model flow 2 mL/s and actual capacity 288000 L
- Obtain actual filling time 40 h
- Explain time ratio 8000 from compatible volume/flow ratios and reject direct length scaling
Acceptable alternatives — RATE-sample
- Direct actual-volume/actual-flow calculation is sufficient for the time; an equivalent dimensional-ratio argument must cube the length ratio and convert L to mL. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: RATE-sample — Applying a length multiplier directly to time while ignoring volume and flow units.
Next step: RATE-sample — Calculate each tank's volume and pump flow in one common unit system before comparing volume divided by flow.
FLOW · Network flow
MST-12-S2-06: directed capacities, feasible flow, conservation, cuts, maximum flow and changing demand. Representative independent preview, not a complete chapter course.
Before you start: Year 11 networks; a capacity is an upper limit, not an instruction that every arc is saturated.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
FLOW-sample 6 marks · Scientific calculator · Select, calculate and explain
The directed network displays capacities in L/min. Two feasible assignments list flows in order (SU,UA,UB,AT,BT): F=(8,8,0,8,0) and G=(8,0,8,0,8). Certify their common delivery as maximum. Construct the component-by-component mean assignment and test its conservation and capacities. A planner instead takes the larger of F and G on every arc and claims 16 L/min delivery. Write that proposed assignment and locate its failure. Explain why combining two maximum totals this way does not create a new source supply.
Worked solution — FLOW-sample
- Both deliver 8 L/min, matching the cut {S}|{U,A,B,T} of capacity SU=8, so both are maximum.
- Their mean is (8,4,4,4,4). U receives 8 and sends 4+4; A and B each balance at 4, within every capacity. Delivery remains 8.
- The edgewise maximum is (8,8,8,8,8). Although each arc is at or below its capacity, U receives only 8 and sends 16, violating conservation.
- F and G are alternative routings of the same inlet supply, so their separate eight-unit deliveries cannot simply be added.
Marking guidance — one mark per criterion — FLOW-sample
- Certify maximum 8 with a feasible assignment and source cut
- Construct the mean (8,4,4,4,4)
- Verify conservation of the mean at U, A and B
- Check that each mean flow is between zero and its arc capacity 8
- Construct the edgewise maximum and identify U's 8-in/16-out failure
- Explain the shared source-supply constraint
Acceptable alternatives — FLOW-sample
- Any complete conservation table supports the same conclusion; the mean is a new steady feasible split under these continuous-flow units. The mean assignment, its conservation and its capacity check earn three independent whole points. A correct mean tuple alone earns 1/3 of those points; balances without the capacity check earn 2/3. Numerical equalities and inequalities suffice: U has 8=4+4, A and B each have 4=4, and all five flows lie in [0,8]. With the other three criteria met, those cases give 4/6 and 5/6 respectively. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: FLOW-sample — Checking each arc's upper bound while omitting intermediate flow conservation.
Next step: FLOW-sample — Make an inflow/outflow row for U for each proposed combined assignment.
CPA · Critical path analysis
MST-12-S2-07: precedence/dummy diagrams, forward/backward scans, float, Gantt construction and spreadsheet/duration changes; at most ten activities. Representative independent preview, not a complete chapter course.
Before you start: Use day zero for starts; all stated predecessors must finish; assume sufficient workers unless a constraint is supplied.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
CPA-sample 5 marks · Scientific calculator · Select, calculate and explain
The activity-on-arrow network shows A=2 days, B=3 after A, C=6 starting independently, and D=1 after A, B and C. Dashed arcs have zero duration and carry precedence only. Find the earliest finish and critical real-activity path. Two edits respectively remove the direct A-to-D dependency (U→J) and the B-to-D dependency (V→J), leaving all other links. Explain why the first edit preserves all prerequisite requirements but the second does not, even though both edited forward scans still finish at day 7. Test the second edit using B scheduled from day 4 to day 7 and D from day 6 to day 7.
Worked solution — CPA-sample
- A runs 0–2, B 2–5 and C 0–6, so D runs 6–7. Critical real activities are C–D.
- The direct U→J link is redundant because U→V→J already requires A, then B, before D; deleting only U→J loses no prerequisite.
- Deleting V→J leaves J waiting for A and C but not B. Its earliest finish is still 7 because C is initially longer, which conceals the lost rule.
- B4–7 and D6–7 satisfy the edited links but overlap before required predecessor B is complete. They violate the original dependency.
- The redundant link is identified by an alternative directed dependency path, not by unchanged earliest project duration.
Marking guidance — one mark per criterion — CPA-sample
- Find finish day 7 and critical C–D
- Explain the U→V→J alternative path that makes U→J redundant
- Identify the lost B prerequisite after deleting V→J despite unchanged earliest finish
- Use B4–7/D6–7 as an explicit original-rule violation
- Distinguish transitive dependency evidence from a duration-only comparison
Acceptable alternatives — CPA-sample
- A precedence table or Gantt counterexample is equivalent. To retain B4–7 under the original rules, D must wait until 7 and finish at 8. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: CPA-sample — Calling every non-controlling prerequisite redundant because the earliest finish stays the same.
Next step: CPA-sample — Trace directed prerequisite paths, then test a later allowed activity schedule as well as the earliest one.
DATA · Bivariate data analysis
MST-12-S2-08: paired/scatter evidence, by-eye and calculator Pearson/least-squares work, interpretation and causal/prediction limits. Representative independent preview, not a complete chapter course.
Before you start: Year 11 univariate summaries; keep observed pairs together; use the calculator's two-variable statistics mode.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
DATA-sample 4 marks · Scientific calculator · Select, calculate and explain
The supplied scatter records pairs (3,4), (3,6) and (3,8). Find the mean response. A report calls the vertical alignment a perfect positive relationship with Pearson r=1 and a unique line predicting response at input 4. Assess those claims. Show that each of y=6 and y=x+3 has the same sum of squared vertical errors at the three observed inputs, and explain why no graph of a single function y=f(x) can pass through all three observations.
Observed pairs: blue circles
| Input x | Response y |
|---|---|
| 3 | 4 |
| 3 | 6 |
| 3 | 8 |
Worked solution — DATA-sample
- Mean response is (4+6+8)/3=6. Both proposed lines predict 6 at x=3, so their residuals are −2,0,2 and each squared-error sum is 4+0+4=8.
- There is no input variation. Pearson's denominator has a zero input-spread factor, so r is undefined, not 1.
- Any line y=m(x−3)+6 gives the same predictions and minimum error 8 at the observed input, leaving its slope unidentified. At x=4 the two illustrated predictions are 6 and 7; the data do not select one.
- A function has one response for each input, whereas the three observations give three different responses at x=3. Vertical alignment is not a perfect increasing functional relationship.
Marking guidance — one mark per criterion — DATA-sample
- Find mean response 6 and squared-error sum 8 for both lines
- Explain undefined Pearson r from zero input variation
- Show distinct input-4 predictions and non-unique fitted slope
- Explain why a single-valued function cannot pass through the vertical observations
Acceptable alternatives — DATA-sample
- A calculator error is consistent with the zero-spread denominator, but a bare error display is insufficient without the reason; no numerical NaN is treated as an answer. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: DATA-sample — Interpreting the visual straightness of a vertical scatter as r=1.
Next step: DATA-sample — Inspect the spread of each variable separately and compare predictions at the actual observed input first.
PROB · Relative frequency and probability
MST-12-S2-09: finite spaces, complements, multi-stage evidence, conditional groups, observed/expected counts and claims. Representative independent preview, not a complete chapter course.
Before you start: Fractions, exhaustive disjoint outcomes and the exact replacement/independence rules supplied.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
PROB-sample 5 marks · Scientific calculator · Select, calculate and explain
Three fair three-sector spinners have labels A=(2,2,5), B=(1,4,4) and C=(3,3,3). Every physical sector is equally likely, even when labels repeat. In each contest the two named spinners are spun independently; the higher label wins. For A against B, list the nine ordered physical-sector outcomes or an equivalent 3 by 3 value table and find P(A wins). Similarly find P(B beats C) and P(C beats A). Does any spinner have a greater-than-half chance of beating each of the other two? Explain the pairwise cycle. Find the expected number of A wins in 180 independent A-versus-B contests, distinguishing expectation from a guaranteed result.
Worked solution — PROB-sample
- For A-sector rows 2,2,5 and B-sector columns 1,4,4, winning cells per row are 1,1,3, total 5 of 9. Thus P(A beats B)=5/9. Repeated labels still represent different equally likely sectors.
- B beats C whenever B is 4: 2/3. C beats A whenever A is 2: 2/3. There are no ties in any of these pairs.
- A is favoured over B, B over C and C over A. No spinner is favoured over both opponents; pairwise winning probability need not give one best choice independently of the opponent.
- Expected A wins=180×5/9=100. Actual repeated-contest counts can differ from 100.
Marking guidance — one mark per criterion — PROB-sample
- Construct nine equally likely physical-sector pair cells with repeated labels retained
- Count five A-over-B wins and give 5/9
- Find both other probabilities 2/3
- Explain the directed preference cycle and absence of a universal favourite
- Find expectation 100 with a sampling qualification
Acceptable alternatives — PROB-sample
- A complete labelled tree or direct product of sector probabilities is equivalent; do not assume transitivity from one favourable pair. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: PROB-sample — Collapsing repeated printed labels into equally likely unique values.
Next step: PROB-sample — Label physical sectors A1,A2,A3 and B1,B2,B3 before writing their displayed values in the table.
NORM · Standard scores and what a shaded area means
Selected MST-12-S2-10: standardisation, empirical areas and a qualified normal-model judgment.
Before you start: Use mean, positive standard deviation, symmetry and the approximate 68/95/99.7 rule.
Suggested study time: 45 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
NORM-1 3 marks · Scientific calculator · Select, calculate and explain
In the supplied normal model, identify the two boundaries of the hatched band. Use the empirical rule to estimate its probability. Explain why symmetry does not make this band's area 50%.
Mean 55; standard deviation 4. Hatching marks the shaded area.
| Lower boundary (Measurement) | Upper boundary (Measurement) |
|---|---|
| 51 | 63 |
Worked solution — NORM-1
- The boundaries are 51 and 63, corresponding to z=−1 and z=2.
- The band contains 68% plus the interval from z=1 to z=2: (95−68)/2=13.5%. Its approximate area is 81.5%.
- Symmetry halves the whole curve at its mean, not at arbitrary band boundaries.
Marking guidance — one mark per criterion — NORM-1
- Identify 51 and 63 from the displayed scale
- Combine 68% and 13.5% to obtain 81.5%
- Explain the role of the mean in symmetry
Acceptable alternatives — NORM-1
- Subtracting the left 16% and right 2.5% tails from 100% is equivalent. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: NORM-1 — Halving an interval merely because the curve is symmetric.
Next step: NORM-1 — Mark the mean and the standard-deviation bands before adding areas.
NORM-2 3 marks · Scientific calculator · Select, calculate and explain
One dataset has mean 28 and standard deviation 4. A second dataset records each original value plus 100. For the original value 34, calculate the standard score in both datasets. State the transformed mean and standard deviation, and explain why adding 100 does not change relative position.
Worked solution — NORM-2
- The second mean is 128 and its standard deviation remains 4.
- Original z=(34−28)/4=1.5; transformed z=(134−128)/4=1.5.
- A common translation leaves all distances from the mean unchanged.
Marking guidance — one mark per criterion — NORM-2
- Give transformed mean 128 and spread 4
- Calculate both scores as 1.5
- Explain translation of value and mean together
Acceptable alternatives — NORM-2
- A labelled difference calculation is equivalent. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: NORM-2 — Adding 100 to the standard deviation.
Next step: NORM-2 — Compare each value's distance from its own mean.
NORM-3 3 marks · Scientific calculator · Select, calculate and explain
A device records 1000 waiting times. The mean is 20 minutes and the standard deviation is 5 minutes. The frequency report also says 100 waits are under 8 minutes. A report automatically labels 10–30 minutes as containing about 95% of these observed waits. Explain why the mean and standard deviation alone do not justify that claim, and identify the conflicting supplied evidence. No exact normal-probability calculation is required.
Worked solution — NORM-3
- 10 and 30 are two standard deviations below and above the stated mean.
- The empirical 95% claim requires an approximately normal shape, which the summaries alone do not establish. At least 100 waits are below 8 and hence outside 10–30, so no more than 900/1000=90% can lie in that interval. The observed counts conflict with the automatic 95% description.
Marking guidance — one mark per criterion — NORM-3
- Locate 10–30 as the two-standard-deviation interval
- State the normal-shape requirement
- Use the 90% upper bound to challenge the report
Acceptable alternatives — NORM-3
- An explicit statement that at least 10% lies outside the interval supports the same challenge. Credit valid later working from an earlier plausible result once while retaining the lost earlier criterion. Respect the stated model's domain, units and rounding; do not credit impossible lengths, invalid probabilities or a negative balance after a loan has been cleared.
Common error: NORM-3 — Applying the empirical rule to every dataset with a mean and a standard deviation.
Next step: NORM-3 — Check the shape and the observed counts before using a normal model.