SKILL ALIGN · YEAR 12 · 2027
HSC Mathematics Standard 1 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
9 additional independent questions introduce all 7 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.1 · 9 questions · 33 practice marks · Booklet build: 20261105-06
Independent free sample. These 9 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: NESA Mathematics Standard 11–12 Syllabus (2024), Year 12 Standard 1; first HSC 2027 (checked 25 October 2026). This resource is not endorsed by NESA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed Year 12 learning workshops, not full HSC simulations. Use a NESA-approved scientific calculator, the 2024 Standard reference sheet and a ruler. Use degree mode for triangle work and show reasoning before rounding. Hand loan schedules have at most three periods; supplied longer outputs are evidence to interpret. Reference-sheet formulas for Standard 2 do not expand Standard 1 scope. Standard 1's HSC examination is optional; school-based course completion is separate. Different checks do not establish a measured improvement or an examination grade.
NESA reference sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
ALG · Equal additions and equal multipliers
Selected MST-12-S1-01 skills: distinguish linear from exponential change and interpret a spreadsheet rule.
Before you start: Substitute into a formula; express 15% growth as multiplication by 1.15.
Suggested study time: 45 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
ALG-1 3 marks · Scientific calculator · Interpret, calculate and justify
A craft club has 40 members. Model L adds 6 members per term; model E grows by 15% per term. Calculate both predictions after two terms. Explain why agreement after one term would not establish that the models are equivalent.
Worked solution — ALG-1
- L gives 40 + 2 × 6 = 52.
- E gives 40 × 1.15² = 52.9.
- Both give 46 after one term, but E applies the second percentage to 46. Equal first predictions do not establish equal rules.
Marking guidance — one mark per criterion — ALG-1
- Find L's two-term prediction
- Find E's two-term prediction
- Explain the changing percentage base
Acceptable alternatives — ALG-1
- A two-row recurrence table or direct exponential formula is acceptable.
Common error: ALG-1 — Applying 15% repeatedly to the original 40.
Next step: ALG-1 — Write the opening value beside each percentage calculation.
ALG-2 3 marks · Scientific calculator · Interpret, calculate and justify
Spreadsheet cell B2 contains 75. Cell B3 uses =B2*1.08 and is copied down to B4 with relative references. State the formula in B4 and calculate its value. Explain why =$B$2*1.08 would describe a different process when copied.
Worked solution — ALG-2
- B4 uses =B3*1.08 and gives 75 × 1.08² = 87.48.
- The absolute reference always uses B2, so each copied cell gives 81 rather than applying growth to the previous value.
Marking guidance — one mark per criterion — ALG-2
- State the relative formula
- Calculate 87.48
- Explain the fixed-base alternative
Acceptable alternatives — ALG-2
- A labelled cell-dependency sketch is acceptable alongside the numerical value.
Common error: ALG-2 — Treating the dollar signs as currency symbols inside the formula.
Next step: ALG-2 — Trace each referenced cell before evaluating it.
ALG-3 3 marks · Scientific calculator · Interpret, calculate and justify
Two observations are (0,12) and (1,18). Proposed rules are y=12+6x and y=12(1.5)^x. Verify that both fit the observations, then find their predictions at x=3. What further observation would help distinguish them, without proving either rule for all future x?
Worked solution — ALG-3
- Both give 12 at x=0 and 18 at x=1.
- At x=3 the linear prediction is 30 and the exponential prediction is 40.5.
- A new measured pair, for example at x=3, could favour one model over this interval; finitely many measurements cannot prove its unlimited future validity.
Marking guidance — one mark per criterion — ALG-3
- Verify the two supplied observations
- Find both x=3 predictions
- Propose a discriminating measurement with a bounded conclusion
Acceptable alternatives — ALG-3
- Any x other than 0 or 1 that gives distinct predictions can be justified.
Common error: ALG-3 — Calling a rule proven because it fits two points.
Next step: ALG-3 — Separate fitting known data from testing a new prediction.
INV · Investment
MST-12-S1-02: simple/compound interest, present/future values, rates, account evidence and investment assumptions. Representative independent preview, not a complete chapter course.
Before you start: Match rates to periods; distinguish interest from the closing balance.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
INV-sample 4 marks · Scientific calculator · Interpret, calculate and justify
A fictional fund invests $6000 for nine months at 4.8% p.a. simple interest. It then holds the whole maturity amount for three months in a no-interest account. At month 12 it reinvests all that money for two years at a nominal 2.8% p.a., compounded quarterly. There are no fees or other transactions. Find the amount at month 36 and its shortfall or surplus against a $6600 payment then. Explain the period rate and exponent used for the last stage, and why neither advertised rate applies for all three calendar years. Retain precision until the final cent.
Worked solution — INV-sample
- First interest = 6000×0.048×9/12 = $216, so maturity = $6216.
- The three-month holding interval leaves $6216 unchanged. The final stage uses 0.028/4 = 0.007 per quarter for 8 quarters.
- Final amount = 6216(1.007)^8 = $6572.7447995… = $6572.74. The payment has a $27.26 shortfall.
- The stages have different rate rules and start dates; using a single advertised rate across the three years ignores the dormant interval and rollover amount.
Marking guidance — one mark per criterion — INV-sample
- Find the first maturity amount $6216
- Use quarterly rate 0.007 and 8 periods after the unchanged holding interval
- Find the final $6572.74 and $27.26 shortfall
- Explain why a single three-year growth rule misstates this timeline
Acceptable alternatives — INV-sample
- A dated recurrence or separate future-value calculation for the final stage is equivalent.
Common error: INV-sample — Counting the three no-interest months as compound-interest quarters.
Next step: INV-sample — Mark every change of account on a 36-month timeline and count compound credits only after month 12.
LOAN · Depreciation, loans and credit
MST-12-S1-03: straight-line/declining values, up to three hand loan periods, longer supplied schedules and credit-card charges. Representative independent preview, not a complete chapter course.
Before you start: Opening balance, interest, payment timing, fees and positive monetary amounts.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
LOAN-sample 4 marks · Scientific calculator · Interpret, calculate and justify
A classroom valuation gives two equipment items initial values of $1000 each. Item A loses 10% of its remaining value each year; B loses 30%. No item is replaced and no other value changes occur. Find each item's value and the combined value after years 1 and 2. A report notices the first combined annual loss is 20% and applies that rate to the whole set forever. Test its year-2 prediction and explain why averaging the two annual rates is not a valid permanent rule here.
Worked solution — LOAN-sample
- After year 1, A is $900 and B $700, total $1600. The initial combined loss is $400/$2000=20%.
- After year 2, A is $810 and B $490, total $1300.
- A constant 20% model predicts 2000(0.8)^2=$1280, which is $20 below the stated two-item model. The second year's actual combined loss is $300/$1600=18.75%.
- The faster-depreciating item is a smaller share of the remaining total after year 1. Each item's own multiplier stays fixed, but their weights in the combined total change; an initially correct average need not stay correct.
Marking guidance — one mark per criterion — LOAN-sample
- Find both year-1 values and $1600 total
- Find both year-2 values and $1300 total
- Test $1280 prediction and quantify its $20 error
- Explain changing value weights rather than a change in either item's own rate
Acceptable alternatives — LOAN-sample
- Separate exponential rules followed by addition are equivalent to a two-row value table; no loss is an extra cash payment.
Common error: LOAN-sample — Applying the unweighted mean rate to a combined balance after its component weights have changed.
Next step: LOAN-sample — Keep two asset columns for another year, then compare the sum with the proposed one-column model.
TRI · Right-angled triangles
MST-12-S1-04: Pythagoras, right-triangle trigonometry, degrees/minutes, elevation/depression and true/compass bearings. Representative independent preview, not a complete chapter course.
Before you start: Label horizontal/vertical lengths, distinguish a slope length from a horizontal distance and set degree mode.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
TRI-sample 4 marks · Scientific calculator · Interpret, calculate and justify
On ideal level ground, the intended straight route from S has true bearing 045°. A survey rover instead travels 1000 m from S on bearing 055°, stopping at P. Let F be the point on the intended route reached by moving perpendicularly from P to that route. Find PF and SF to 0.1 m, and the true bearing from P to F. Explain which 10° angle belongs in the right triangle. No terrain or obstacles are involved.
Worked solution — TRI-sample
- The two outward bearings differ by 10°, so angle PSF = 10° and SP = 1000 m is the hypotenuse.
- PF = 1000 sin10° = 173.648… m ≈ 173.6 m. SF = 1000 cos10° = 984.807… m ≈ 984.8 m.
- The actual ray is clockwise, or eastward, of the intended northeast route. The perpendicular correction points northwest on bearing 315°, not southeast 135°.
- The 10° is between SP and SF; neither 045° nor 055° is the acute angle at S in this triangle.
Marking guidance — one mark per criterion — TRI-sample
- Identify the 10° included angle and hypotenuse
- Find 173.6 m cross-track correction
- Find 984.8 m progress along the intended route
- Give 315° with the correct side-of-route explanation
Acceptable alternatives — TRI-sample
- A correctly rotated coordinate calculation or similar-triangle argument is equivalent; rounding must follow the unrounded calculations.
Common error: TRI-sample — Using sin55° for the offset from a route whose own bearing is 045°.
Next step: TRI-sample — Draw both bearings from one north line, then mark the perpendicular foot before choosing a trigonometric ratio.
RATE · Ratios, scale and rates
MST-12-S1-05: ratios, plans, rates/conversions, practical quantities, best buys, travel and fuel efficiency. Representative independent preview, not a complete chapter course.
Before you start: Common units, proportional scaling and whole-item constraints; Year 11 measurement.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
RATE-sample 4 marks · Scientific calculator · Interpret, calculate and justify
An original plan has uniform scale 1:300. A copier stretches every horizontal length to 150% of its original size, but every vertical length to 75%. On the copy a rectangle measures 6.0 cm horizontally and 1.5 cm vertically. Recover its actual dimensions and area, then state the separate horizontal and vertical scales of the copy. Explain why using one scale from its horizontal bar for every length would be unsafe. All lengths and copying factors needed are stated; no separate drawing is required.
Worked solution — RATE-sample
- Original paper dimensions are 6/1.5=4 cm and 1.5/0.75=2 cm.
- At 1:300 these represent 12 m and 6 m, giving 72 m².
- One copied horizontal unit represents 300/1.5=200 actual units, so horizontal scale is 1:200. Vertically 300/0.75=400, so scale is 1:400.
- The distortion uses different factors in perpendicular directions. Applying 1:200 to the copied vertical side would give 3 m rather than 6 m; one bar cannot establish a uniform scale.
Marking guidance — one mark per criterion — RATE-sample
- Reverse both different copying factors
- Recover 12 m and 6 m actual dimensions
- Find 72 square metres
- Give 1:200 and 1:400 and explain why one uniform scale fails
Acceptable alternatives — RATE-sample
- Converting the copied lengths directly with their two directional scales is equivalent.
Common error: RATE-sample — Applying the horizontal copying factor to both dimensions.
Next step: RATE-sample — Keep separate horizontal and vertical conversion chains until both actual lengths are found.
DATA · Bivariate data analysis
MST-12-S1-06: paired variables, complete scatter evidence, form/direction/strength, by-eye fits, prediction limits and causation. Representative independent preview, not a complete chapter course.
Before you start: Year 11 data summaries; keep pairs together and distinguish a measurement from a model prediction. Pearson/regression computation is not required.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
DATA-sample 4 marks · Scientific calculator · Interpret, calculate and justify
Three fictional sessions have 5, 10 and 15 attendees. Every session has the same $60 room-hire charge and 12 L of water supplied. The plot compares calculated hire cost per attendee with water supplied per attendee. Recalculate its three pairs and describe the form, direction and strength. Explain the common arithmetic reason for the pattern, and assess a claim that paying more causes an attendee to drink more. Actual drinking was not measured.
Calculated ratios; not drinking measurements: blue circles
| Hire cost per attendee ($) | Water supplied per attendee (L) |
|---|---|
| 12 | 2.4 |
| 6 | 1.2 |
| 4 | 0.8 |
Worked solution — DATA-sample
- For 5 attendees the pair is (12,2.4); for 10 it is (6,1.2); for 15 it is (4,0.8), in dollars/person and litres/person.
- The plotted points have an exact positive linear association; water per attendee is 0.2 times hire cost per attendee.
- Both divide fixed totals by the same attendance n: x=60/n and y=12/n. Changing n generates the pattern without changing either total.
- Supplied water is not measured consumption, and no intervention varied what an individual paid. The causal drinking claim is unsupported by this plot.
Marking guidance — one mark per criterion — DATA-sample
- Recalculate all three correctly paired ratios
- Describe exact positive linear association
- Explain the shared attendance denominator using the fixed totals
- Reject the drinking claim by distinguishing calculated supply from consumption and causal evidence
Acceptable alternatives — DATA-sample
- A clear proportional argument using 12/60 instead of algebraic n is equivalent; no Pearson calculation is required.
Common error: DATA-sample — Treating two quantities with a shared denominator as independent evidence of a causal effect.
Next step: DATA-sample — Write each plotted coordinate in terms of its original numerator and denominator before interpreting the relationship.
PROB · Relative frequency and probability
MST-12-S1-07: finite equally likely spaces, complements, two-stage experiments, tables, observed/expected frequencies and responsible claims. Representative independent preview, not a complete chapter course.
Before you start: Fractions, independent trials when stated, exhaustive outcomes and Year 11 data interpretation.
Suggested study time: 25 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
PROB-sample 4 marks · Scientific calculator · Interpret, calculate and justify
Asha, Ben and Chen are equally likely to be drawn as captain. That name is removed, then one of the two remaining names is drawn uniformly as timekeeper. List the six equally likely ordered assignments (captain,timekeeper). Find the chance that Asha has either role. An organiser multiplies 1/3 by 1/3 to claim a 1/9 chance that she holds both roles. Use the actual two-stage procedure to assess that claim.
Worked solution — PROB-sample
- The assignments are (Asha,Ben), (Asha,Chen), (Ben,Asha), (Ben,Chen), (Chen,Asha), (Chen,Ben). Each has probability (1/3)(1/2)=1/6.
- Four contain Asha, so P(Asha in either role)=4/6=2/3.
- Asha has each individual role with probability 1/3, but she cannot hold both: that probability is 0. Once she is captain, her name is absent from the second draw.
- The product 1/3×1/3 incorrectly treats the second eligible set as unaffected by the first assignment.
Marking guidance — one mark per criterion — PROB-sample
- List all six ordered assignments without repeated names
- Establish each path has probability 1/6
- Find 2/3 for either role
- Reject 1/9 for both using the changed second-draw eligible set
Acceptable alternatives — PROB-sample
- A complete labelled tree or two-way table with impossible diagonal cells is equivalent.
Common error: PROB-sample — Keeping the captain's name available for the timekeeper draw.
Next step: PROB-sample — Cross out the first name on each branch before listing the second-stage options.