SKILL ALIGN · YEAR 12 · 2027
HSC Mathematics Extension 2 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
5 additional independent questions introduce all 5 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.2 · 5 questions · 18 practice marks · Booklet build: 20261108-01
Independent free sample. These 5 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: NESA Mathematics Extension 2 11–12 Syllabus (2024), Year 12; first HSC 2027 (checked 26 October 2026). This resource is not endorsed by NESA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed Year 12 learning workshops, not HSC simulations. Mathematics Advanced and Extension 1 are assumed corequisite courses. Use a NESA-approved scientific calculator, the Extension 2 2024 reference sheet and a ruler. Digital graphing workshops are labelled and supply reproducible inputs; they do not establish examination tool permissions. Angles are radians unless degrees are specified. Arg z is in (−π,π], arg 0 is undefined and 1/z requires z≠0. In SHM, x−c is displacement from the centre c. Mechanics uses the stated inertial ground frame, point masses and stated gravitational acceleration; an ideal pulley is smooth with a light inextensible rope and no resistance. Resisted pulley systems are excluded. Resistance opposes velocity and its direction must be reconsidered after a turn. Terminal velocity is a limiting value unless the object starts in equilibrium. Finite numerical anchors check calculations and do not replace requested proofs. Checks are different selected-skill tasks, not equated scores, grade predictions or measured learning gains.
NESA reference sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
PROOF · The nature of proof
ME2-12-01: propositions, quantifiers, negation, implication and converse; direct and contradiction proofs, inequalities with equality conditions, squeeze arguments and extended induction. Representative independent preview, not full chapter depth.
Before you start: Advanced and Extension 1 algebra, calculus, induction and integer divisibility; finite numerical tests are not universal proofs.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
E2-S-quantifier-order-reciprocal 3 marks · Scientific calculator · Reason, calculate and justify
Decide whether ∃ real a such that ∀ nonzero real x, ax=1. Negate the statement and prove the true version, explaining the order of the quantifiers.
Worked solution — E2-S-quantifier-order-reciprocal
- The negation is ∀ real a, ∃ nonzero real x such that ax≠1.
- The original would require a=1 from x=1 and a=1/2 from x=2, a contradiction. Thus the original is false and its negation true.
Marking guidance — one mark per criterion — E2-S-quantifier-order-reciprocal
- Negate both quantifiers and the equality.
- Use two admissible inputs to refute a single universal a.
- Explain why choosing a separately for each x changes the claim.
Acceptable alternatives — E2-S-quantifier-order-reciprocal
- An explicit counterexample x for each a also proves the negation. Credit mathematically equivalent exact forms and valid consequential working once. Preserve all domains; finite checking is not proof.
Common error: E2-S-quantifier-order-reciprocal — Allowing a to depend on x despite its outer existential quantifier.
Next step: E2-S-quantifier-order-reciprocal — Choose two allowed x values before solving for a.
VEC · Further work with vectors
ME2-12-02: line and curve representations in two and three dimensions, spheres, intersections and skew lines; dot-product and Cauchy–Schwarz reasoning; medians, altitudes, perpendicular and angle bisectors. Representative independent preview, not full chapter depth.
Before you start: Extension 1 components, magnitude, projection and dot products. Graphing application workshops have explicit reproducible inputs.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
VEC-sample 5 marks · Scientific calculator · Reason, calculate and justify
The spatial curve is r(t)=(t,t²,sin t), t real. Let a and b be distinct real numbers. Give the complete line through r(a) and r(b) using a scalar parameter λ. Prove that this line contains no other point of the curve, including outside the chord segment. For the chord midpoint calculate the excess of its second coordinate over the curve's second coordinate at the same first coordinate. Explain why its third coordinate cannot restore curve membership.
Worked solution — VEC-sample
- The line is L(λ)=(1−λ)(a,a²,sin a)+λ(b,b²,sin b), λ∈R. Its direction is nonzero because a≠b.
- If L(λ)=r(t), the first coordinate forces t=(1−λ)a+λb.
- Subtracting this t² from the line's second coordinate gives (1−λ)a²+λb²−[(1−λ)a+λb]²=λ(1−λ)(a−b)². Since a≠b, this vanishes only at λ=0 or 1, which give the original endpoints and also satisfy the third coordinate.
- Thus the entire line has exactly those two curve points, so no three distinct curve points are collinear. At λ=1/2 the positive excess is (a−b)²/4.
- The midpoint fails the necessary second-coordinate equation. No value of the third coordinate can undo that failure.
Marking guidance — one mark per criterion — VEC-sample
- Give the full real-parameter line with nonzero direction
- Use its first coordinate to identify the only possible t
- Derive and factor the second-coordinate discrepancy
- Prove only the two endpoints can belong, including exterior line points
- Find midpoint excess (a−b)²/4 and explain the necessary-coordinate obstruction
Acceptable alternatives — VEC-sample
- An equivalent quadratic factorisation in the candidate t is valid if all real line parameters and both endpoint verifications are included. Credit mathematically equivalent exact forms and valid consequential working once. Preserve all domains; finite checking is not proof.
Common error: VEC-sample — Treating a chord midpoint as a curve point by averaging parameters, or checking only the segment while claiming a result for the full line.
Next step: VEC-sample — Insert the first-coordinate parameter into the curve's second coordinate and compare it with the actual line coordinate.
COMPLEX · Introduction to complex numbers
ME2-12-03: arithmetic and conjugation, polar representation and principal arguments, equations, de Moivre and roots, geometric proofs and lines, circles, rays and regions. Course support: for Az²+Bz+C=0 with complex coefficients and A≠0, completing the square gives (2Az+B)²=D=B²−4AC. Retain both roots z=(−B±s)/(2A), where s²=D; D=0 gives one double root. If D=u+iv is nonreal, put r=√[(|D|+u)/2]>0 and q=v/(2r); then r²−q²=u and 2rq=v, so ±(r+iq) are its two square roots. For positive or negative real D use ±√D or ±i√(−D), respectively. Angle addition proves (r cisθ)ⁿ=rⁿcis(nθ) for positive integers by induction. For r>0, reciprocation gives the same rule for negative integers, and the zero exponent is 1. Reduce principal arguments afterwards; multiplying a principal argument does not guarantee it stays principal. Representative independent preview, not full chapter depth.
Before you start: Real polynomials, trigonometric identities and radians. Arg z is in (−π,π]; zero has no argument and reciprocals require z≠0.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
E2-S-polar-exponent-collision 2 marks · Scientific calculator · Reason, calculate and justify
Two nonzero complex numbers z,w have equal moduli and z³=w³ while z²≠w². Determine all possible values of z/w and their principal arguments, proving that there are no other possibilities.
Worked solution — E2-S-polar-exponent-collision
- Put q=z/w. Then q³=1 and q²≠1, so q≠1.
- Factoring q³−1 gives q²+q+1=0 and q=−1/2±i√3/2. Their principal arguments are ±2π/3.
Marking guidance — one mark per criterion — E2-S-polar-exponent-collision
- Reduce to a nonzero quotient and exclude q=1.
- Solve the remaining factor and give both principal arguments.
Acceptable alternatives — E2-S-polar-exponent-collision
- de Moivre gives the same two surviving roots. Credit mathematically equivalent exact forms and valid consequential working once. Preserve all domains; finite checking is not proof.
Common error: E2-S-polar-exponent-collision — Concluding z=w from equality of cubes.
Next step: E2-S-polar-exponent-collision — Factor the difference of powers before taking arguments.
INT · Further integration
ME2-12-04: product-to-sum and t=tan(θ/2) derivations and restricted equations; substitution, division, completing squares, partial fractions including irreducible quadratics and square factors, parts and recurrences. Course support: adding or subtracting the angle-addition identities gives 2cos A cos B=cos(A+B)+cos(A−B), 2sin A sin B=cos(A−B)−cos(A+B), 2sin A cos B=sin(A+B)+sin(A−B), and 2cos A sin B=sin(A+B)−sin(A−B). The order of the last two differences matters. For t=tan(θ/2), divide the double-angle formulas by cos²(θ/2) to get sinθ=2t/(1+t²), cosθ=(1−t²)/(1+t²), tanθ=2t/(1−t²); differentiation gives dθ=2dt/(1+t²). The tangent expression excludes t=±1. A finite t chart omits θ=π modulo 2π, which must be tested in the original equation or integrand. These derivations are shared course foundations; the activities below apply them with their own restrictions. Representative independent preview, not full chapter depth.
Before you start: Advanced and Extension 1 calculus, rational identities, inverse trigonometry and exact endpoints. Differentiate primitives to check them.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
INT-sample 6 marks · Scientific calculator · Reason, calculate and justify
Let f be continuously differentiable on [0,1], with f(0)=0 and f(1)=1, and put I=∫₀¹f′(x)f(1−x)dx. Integrate by parts, then use u=1−x on the remaining integral. A student concludes I=−I and hence I=0. Identify the sign error and state what the calculation actually establishes. Decide whether the endpoint records determine I by evaluating it separately for f(x)=x and f(x)=x², both of which satisfy those records.
Worked solution — INT-sample
- Use u=f(1−x) and dv=f′(x)dx in parts: I=[f(x)f(1−x)]₀¹+∫₀¹f(x)f′(1−x)dx. The boundary term is zero because it is f(1)f(0)−f(0)f(1).
- Set u=1−x in the remaining J: J=−∫₁⁰f(1−u)f′(u)du=∫₀¹f′(u)f(1−u)du=I.
- Thus parts returns I=I, an identity giving no value. The incorrect negative came from changing the differential without reversing the transformed bounds.
- For f=x, I=∫₀¹(1−x)dx=1/2.
- For f=x², I=∫₀¹2x(1−x)²dx=1−4/3+1/2=1/6.
- The same endpoint records allow different integral values, so they do not determine I, and in particular do not force zero.
Marking guidance — one mark per criterion — INT-sample
- Apply parts with the correct derivative sign and zero boundary term
- Transform both remaining-integral bounds and its differential
- Identify I=I and the report's missing bound reversal
- Calculate I=1/2 for f=x
- Calculate I=1/6 for f=x²
- Use the two admissible functions to prove endpoint information is insufficient
Acceptable alternatives — INT-sample
- A direct derivative-of-the-product identity gives the same equality I=J; retain both explicit counterexample integrals and their endpoint checks. Credit mathematically equivalent exact forms and valid consequential working once. Preserve all domains; finite checking is not proof.
Common error: INT-sample — Turning an integration-by-parts identity into a numerical equation by losing one substitution-bound sign.
Next step: INT-sample — Write the transformed lower and upper bounds before simplifying the negative differential, then test the claimed value on an explicit allowed function.
MECH · Applications of calculus to mechanics
ME2-12-05: equivalent acceleration forms, Newton's laws and 2D/3D forces; centred SHM and graphs; unresisted inclines and single smooth pulleys, pure resistance, vertical linear/quadratic drag and linear-drag projectiles. Representative independent preview, not full chapter depth.
Before you start: Advanced and Extension 1 calculus and motion; resolve signed forces in a stated inertial frame. Resisted pulley systems are excluded.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
E2-S-centre-force-law-diagnosis 2 marks · Scientific calculator · Reason, calculate and justify
A one-dimensional particle satisfies x″=12−3x, with x in metres and t in seconds. A student calls x itself the SHM displacement. Find the centre, angular frequency and acceleration when x=2; explain the correct displacement and whether acceleration points towards the centre.
Worked solution — E2-S-centre-force-law-diagnosis
- Write x″=−3(x−4). The centre is c=4 m and n=√3 s⁻¹.
- At x=2, acceleration is +6 m s⁻², towards x=4. The SHM displacement is x−4, not the origin coordinate x.
Marking guidance — one mark per criterion — E2-S-centre-force-law-diagnosis
- Identify centre and angular frequency from the centred equation.
- Calculate and interpret the signed acceleration.
Acceptable alternatives — E2-S-centre-force-law-diagnosis
- Shifting to u=x−4 makes u″=−3u explicit. Credit mathematically equivalent exact forms and valid consequential working once. Preserve all domains; finite checking is not proof.
Common error: E2-S-centre-force-law-diagnosis — Calling every equation with a negative x coefficient motion about the origin.
Next step: E2-S-centre-force-law-diagnosis — Rewrite the law as −n²(x−c).