SKILL ALIGN · YEAR 12 · 2027
HSC Mathematics Extension 1 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
8 additional independent questions introduce all 6 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.2 · 8 questions · 33 practice marks · Booklet build: 20261107-01
Independent free sample. These 8 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: NESA Mathematics Extension 1 11–12 Syllabus (2024), Year 12; first HSC 2027 (checked 26 October 2026). This resource is not endorsed by NESA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed Year 12 learning workshops, not HSC simulations. Advanced and Year 11 Extension 1 are prerequisites; this resource does not replace either corequisite course. Use a NESA-approved scientific calculator, the Extension 1 2024 reference sheet and a ruler. Angles are in radians unless degrees are explicitly requested. Respect principal inverse-trigonometric branches; supplied substitutions and partial-fraction identities are part of the task. Exact binomial calculations are required: a normal approximation to a binomial count is excluded. CLT tasks concern independently sampled means and supply the required normal tables or quantiles. Digital graphing/spreadsheet tasks are labelled workshops and include a reproducible setup; these are separate from examination tool permissions. Unless stated otherwise, motion uses Cartesian coordinates near Earth, a point projectile, no air resistance and the stated downward gravitational acceleration. All money is in Australian dollars unless stated otherwise. Checks are different selected-skill tasks, not equated scores, grade predictions or evidence of measured improvement.
NESA reference sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
IND · Proof by mathematical induction
ME1-12-01: base and induction steps, sums, divisibility and invalid-proof diagnosis; numerical anchors supplement, never replace, the requested proof. Representative independent preview, not full chapter depth.
Before you start: Year 11 algebra, finite sums, positive integer indices, factors and integer divisibility.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
IND-sample 4 marks · Scientific calculator · Reason, calculate and justify
Prove by mathematical induction that 1³+3³+⋯+(2n−1)³=n²(2n²−1) for every positive integer n. Display the complete successor increment. A learner instead cubes the sum of the first n odd numbers and obtains n⁶. Use a small counterexample to explain why that operation does not compute the requested sum of cubes.
Worked solution — IND-sample
- At n=1, both sides equal 1.
- Assume the sum through 2k−1 equals 2k⁴−k². The next summand is (2k+1)³.
- The proposed right-side increment is [2(k+1)⁴−(k+1)²]−[2k⁴−k²]=8k³+12k²+6k+1=(2k+1)³. Thus adding the next summand gives the required k+1 formula; induction proves the claim.
- At n=2 the sum of cubes is 1+27=28, whereas the cube of the sum is (1+3)³=64=2⁶. Cubing a sum introduces mixed-product terms and is a different operation.
Marking guidance — one mark per criterion — IND-sample
- Verify the base and state the arbitrary-k hypothesis
- Expand the successor difference completely
- Identify the exact next summand and conclude by induction
- Give the n=2 comparison 28 versus 64 and explain the mixed terms
Acceptable alternatives — IND-sample
- Expanding F(k)+(2k+1)³ and refactoring as (k+1)²[2(k+1)²−1] supplies the same induction step. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: IND-sample — Replacing a sum of powers by a power of a sum, or checking only a few values instead of the successor identity.
Next step: IND-sample — Keep the running sum intact and compare the two proposed polynomial values at k+1 and k.
VEC · Introduction to vectors and two-dimensional motion
ME1-12-02: representations, 2D/3D components, magnitude, unit/zero vectors, perpendicular rotations, dot-product proofs, projection, vector motion, crosswind/current and projectiles. Representative independent preview, not full chapter depth.
Before you start: Advanced calculus and Year 11 parametric equations; vector magnitude is nonnegative and direction includes its quadrant.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
VEC-sample 5 marks · Scientific calculator · Reason, calculate and justify
A route goes from A=(0,0,0) to P=(2,t,1), then to B=(4,0,0), where t is real and coordinates are in metres. Find every t for which the two consecutive travel directions are perpendicular. Find the length of each such route and compare it with the straight A-to-B distance. If P must also have positive second coordinate, does exactly one route remain? Show the vector conditions without assuming that a right turn makes the route shortest.
Worked solution — VEC-sample
- The travel vectors are AP=(2,t,1) and PB=(2,−t,−1).
- Their dot product is 4−t²−1=3−t², so perpendicular travel occurs exactly at t=±√3.
- At either value each leg has length √(4+3+1)=2√2 m, so the complete route is 4√2 m, greater than the direct distance 4 m.
- The two intermediate points are reflections across the xz-plane; requiring t>0 retains only t=√3. Orthogonality constrains the turn and does not establish a shortest route.
Marking guidance — one mark per criterion — VEC-sample
- Form both consecutive travel vectors
- Solve their zero dot product for both signed values
- Obtain the two leg lengths and total 4√2
- Compare with the direct 4 m
- Apply the positive-coordinate restriction and interpret uniqueness
Acceptable alternatives — VEC-sample
- A Pythagorean calculation is equivalent after explicitly relating the right angle to the two travel vectors; retain both signs before applying t>0. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: VEC-sample — Using OP as both directions or treating the distance of the resultant as the sum of leg lengths.
Next step: VEC-sample — Subtract the actual endpoint coordinates for each leg before taking their dot product.
INV · Inverse trigonometric functions
ME1-12-03: principal branches, exact values, domains/ranges, reflections, parity, identities, composites and graph transformations with and without graphing workshops. Representative independent preview, not full chapter depth.
Before you start: Year 11 inverse functions, exact trigonometry, graph transformations and radians.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
INV-sample 5 marks · Scientific calculator · Reason, calculate and justify
Let H(x)=arctan(eˣ) for real x. Find its exact range and its inverse rule with the inverse domain. Prove H(−x)=π/2−H(x) using principal ranges. Interpret the corresponding symmetry of its graph and decide whether H itself is odd. A claimed inverse ln(tan y) is then evaluated at y=3π/4; explain precisely why that input is inadmissible over the reals.
Worked solution — INV-sample
- Since eˣ runs through (0,∞), H has range (0,π/2), with neither endpoint attained. It is strictly increasing.
- Solving y=arctan(eˣ) on that range gives eˣ=tan y>0 and H⁻¹(y)=ln(tan y), defined for 0<y<π/2.
- Set α=H(x)∈(0,π/2). The angle π/2−α is principal and has tangent e^(−x), hence equals H(−x).
- Thus (x,H(x)) reflects by a half-turn about (0,π/4) to (−x,π/2−H(x)). H is not odd: H(0)=π/4, although H(x)−π/4 is odd.
- The proposed input 3π/4 lies outside the inverse domain and has tan(3π/4)=−1; its real logarithm does not exist.
Marking guidance — one mark per criterion — INV-sample
- Give the strict range (0,π/2)
- Derive the inverse ln(tan y) on its exact domain
- Prove the reciprocal identity using principal angles
- Identify central symmetry and distinguish shifted oddness
- Reject 3π/4 using both domain and real-log restrictions
Acceptable alternatives — INV-sample
- A geometric complementary-angle proof or the positive reciprocal arctangent identity is equivalent; no derivative of H is requested. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: INV-sample — Treating a tangent identity as permission to include every angle differing by π.
Next step: INV-sample — Write the principal output interval before solving the inverse equation or taking logarithms.
CALC · Further calculus skills
ME1-12-04: parametric/inverse derivatives and proofs, inverse-trigonometric chain/product/quotient rules, inverse-trigonometric integrals, supplied substitutions and power reduction. Representative independent preview, not full chapter depth.
Before you start: Advanced differentiation/integration, domain restrictions, chain rule and verifying a proposed primitive by differentiation.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
CALC-sample 5 marks · Scientific calculator · Reason, calculate and justify
Using the supplied substitution u=x², evaluate A=∫_(−1)^1 2x/(1+x⁴) dx and B=∫_(−1)^1 2|x|/(1+x⁴) dx. Show the transformed bounds separately on [−1,0] and [0,1]. A report gives both integrals value zero because the original endpoints both map to u=1. Explain exactly why that shortcut fails for B and why it happens to give A's correct value.
Worked solution — CALC-sample
- On [−1,0], u decreases from 1 to 0 and du=2x dx. On [0,1] it increases from 0 to 1.
- Therefore A=∫₁⁰ du/(1+u²)+∫₀¹ du/(1+u²)=−π/4+π/4=0.
- On the negative half, |x|=−x, so B=−∫₁⁰ du/(1+u²)+∫₀¹ du/(1+u²)=π/4+π/4=π/2.
- The substitution folds the interval and cannot represent the absolute-value factor by one unchanged signed differential over a single traversal from 1 to 1. A cancels because its original integrand is odd and its two oriented contributions oppose; B is nonnegative and adds both contributions.
Marking guidance — one mark per criterion — CALC-sample
- Give the two directed transformed intervals
- Evaluate A's cancelling inverse-tangent contributions
- Change the differential sign for B on the negative half
- Obtain B=π/2
- Diagnose the folded-interval shortcut and distinguish cancellation from accumulation
Acceptable alternatives — CALC-sample
- Odd/even symmetry followed by one correctly transformed half-integral is equivalent if the two bound directions and the report's error are explained. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: CALC-sample — Using equal substituted endpoints to erase an absolute-value contribution on a non-monotone change of variable.
Next step: CALC-sample — Split at the point where the supplied substitution reverses direction, then simplify |x| on each half.
APP · Further applications of calculus
ME1-12-05: root multiplicity proofs/graphs, related rates with supplied geometry, limiting-value models, areas and x/y-axis revolution, slope fields/IVPs, separable and logistic equations with supplied partial fractions. Representative independent preview, not full chapter depth.
Before you start: Advanced rates, area and exponential models; Year 11 polynomials; mathematical models require units, domains and initial conditions.
Suggested study time: 30 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
APP-sample 5 marks · Scientific calculator · Reason, calculate and justify
For t≥0 a positive quantity follows Q′=[(1−t)/(1+t²)]Q with Q(0)=1. Solve this initial-value problem by separation. Determine its greatest value and when it occurs, and find its limit as t tends to infinity. Explain how the quantity can initially increase yet have future limit zero. Verify the solution directly in the original equation; do not replace the time-dependent factor by one constant decay rate.
Worked solution — APP-sample
- Separate dQ/Q=[1/(1+t²)−t/(1+t²)]dt. Integration gives ln Q=arctan t−(1/2)ln(1+t²)+C. The initial condition gives C=0, so Q=e^(arctan t)/√(1+t²)>0 for all t≥0.
- Because Q is positive, Q′ has the sign of 1−t. Q increases to t=1 then decreases, giving the global maximum e^(π/4)/√2.
- The numerator tends to e^(π/2) while the denominator tends to infinity, so Q→0. Initial increase concerns t<1 and does not determine the later long-term limit.
- Logarithmic differentiation of the proposed rule gives Q′/Q=1/(1+t²)−t/(1+t²)=(1−t)/(1+t²), and Q(0)=1, verifying the equation and data.
Marking guidance — one mark per criterion — APP-sample
- Integrate both separated terms correctly
- Fit the initial condition and give the positive rule
- Use the rate sign to identify the global maximum at t=1
- Derive the zero future limit and reconcile initial growth
- Verify the original differential equation and initial condition
Acceptable alternatives — APP-sample
- An equivalent exponential of the integrated logarithmic rate is valid with a complete maximum, limit and direct verification argument. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: APP-sample — Calling every proportional-rate equation a fixed-coefficient exponential model or inferring a future limit from the initial rate alone.
Next step: APP-sample — Keep the factor's dependence on t through separation, then analyse its sign on the entire stated time domain.
STAT · From trial records to defensible probability
Selected ME1-12-06 Bernoulli/binomial modelling; this sample does not cover the full Year 12 course.
Before you start: Independent events, expectation and basic combinations.
Suggested study time: 35 minutes, including review.
The final question in this chapter is your self-check. Attempt it independently before opening its solution.
E1-F0-trial-identifiers-versus-count 3 marks · Scientific calculator · Reason, calculate and justify
Three independent trials have the same success probability 1/2. A log stores the set of successful trial labels, rather than only their count. Explain why there are eight equally likely log entries but only four possible counts, and obtain the exact count probabilities.
Worked solution — E1-F0-trial-identifiers-versus-count
- Each of three labelled positions is success/failure, giving 2³=8 log entries.
- For counts 0,1,2,3 the numbers of entries are 1,3,3,1.
- Divide by 8: the count probabilities are 1/8,3/8,3/8,1/8; counts are not equally likely.
Marking guidance — one mark per criterion — E1-F0-trial-identifiers-versus-count
- Distinguish labelled outcomes from counts.
- Obtain the four multiplicities.
- Give the four probabilities and reject equal likelihood of counts.
Acceptable alternatives — E1-F0-trial-identifiers-versus-count
- An explicit eight-row tree or table is equally valid. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: E1-F0-trial-identifiers-versus-count — Assigning 1/4 to each possible count.
Next step: E1-F0-trial-identifiers-versus-count — List the labelled success subsets before grouping them by size.
E1-F0-binomial-or-stopped-log 3 marks · Scientific calculator · Reason, calculate and justify
A recorder stops at its first success or after three attempts, whichever comes first; each attempted trial is independent with success probability 1/2. For its recorded success count Y, find P(Y=0) and P(Y=1), and explain why Y is not Bin(3,1/2).
Worked solution — E1-F0-binomial-or-stopped-log
- Y=0 exactly when all three attempted trials fail, with probability (1/2)³=1/8.
- Otherwise the recorder stops at one success, so P(Y=1)=7/8; counts 2 and 3 are impossible.
- The number of attempted trials is not fixed at three; Bin(3,1/2) has positive probabilities for counts 2 and 3.
Marking guidance — one mark per criterion — E1-F0-binomial-or-stopped-log
- Find the zero-success event and probability.
- Obtain the remaining one-success probability.
- Identify the fixed-number-of-trials failure and impossible binomial counts.
Acceptable alternatives — E1-F0-binomial-or-stopped-log
- A probability tree with branches FFF, S, FS and FFS is valid. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: E1-F0-binomial-or-stopped-log — Treating the maximum number of attempts as the fixed number actually observed.
Next step: E1-F0-binomial-or-stopped-log — Separate a stopping rule from a preselected trial count.
E1-F0-expected-record-frequency 3 marks · Scientific calculator · Reason, calculate and justify
A separate experiment runs four independent trials with success probability 1/2 and is repeated independently 48 times. Find the expected number of experiments with exactly two successes. Explain why the result is an expectation rather than a guarantee that a record has that many rows.
Worked solution — E1-F0-expected-record-frequency
- For one experiment, P(X=2)=C(4,2)/16=3/8.
- Let Iⱼ indicate that experiment j has two successes; each E(Iⱼ)=3/8.
- E(I₁+⋯+I₄₈)=48(3/8)=18; actual counts fluctuate and need not equal 18.
Marking guidance — one mark per criterion — E1-F0-expected-record-frequency
- Find the exact one-experiment probability.
- Scale by the 48 repeated experiments.
- Interpret 18 as an expected frequency rather than a guaranteed count.
Acceptable alternatives — E1-F0-expected-record-frequency
- A direct expected-frequency formula is valid with the same interpretation. Credit equivalent exact forms and valid consequential working once. A finite numerical check is not a proof; preserve all stated domains and conditions.
Common error: E1-F0-expected-record-frequency — Multiplying by four trials instead of 48 experiments.
Next step: E1-F0-expected-record-frequency — Name the unit counted by the outer random variable.